Picking a 3D printing process sounds technical, but for an inventor it really comes down to one question: what are you trying to prove with this prototype? A process that looks great on a shelf might not survive someone actually testing how a part snaps together. This post walks through the three processes you'll run into most when ordering a prototype, FDM, SLA and SLS, with real prices and specs, so you can match the process to your goal. For the bigger picture on prototyping your invention, see our pillar guide on 3D printing a prototype.
What do FDM, SLA and SLS actually mean?
FDM (fused deposition modeling) builds a part by pushing melted plastic filament out of a nozzle, layer by layer, the same basic idea as the printer on your desk if you have one. SLA (stereolithography) cures liquid resin with a laser or light source, layer by layer, in a vat. SLS (selective laser sintering) fuses powdered nylon with a laser, one thin layer at a time, and the surrounding unfused powder holds the part up as it prints.
There's a fourth process worth a quick mention: MJF (multi jet fusion), which also works with nylon powder. Its tolerance runs about ±0.012 in plus ±0.002 in per extra inch, according to Protolabs, a bit looser than SLS. We won't cover it in depth here, but it's common at online services if you're comparing quotes.
Which process looks the best?
If you're building a looks-like model to show investors, a licensing partner or just to hold in your own hands, surface finish matters a lot. According to Formlabs, which sells both SLA and SLS printers and has a commercial interest in this comparison, SLA produces the smoothest surface of the three, SLS comes out slightly rough or grainy, and FDM shows visible layer lines. SLA layers are also thin, about 0.004 in (0.1 mm), per Protolabs, which is part of why SLA parts look so clean straight off the machine.
If you're after a true looks-like prototype, the University of Maine's Advanced Manufacturing Center notes that "looks like" prototypes demonstrate color, shape, feel and size, and that many rapid prototype or 3D printed parts fall into this category, see its prototype guide. SLA is usually the strongest choice when appearance is the whole point. Our post on looks-like vs works-like prototypes goes deeper on this distinction.
Which process holds up to actual use?
If your goal is a "works like" prototype, something the Maine guide describes as a proof of concept that "may not be very pretty, but will prove that an idea works," strength and durability matter more than finish.
SLS tends to be the go-to here. It needs no support structures during printing, per Formlabs, which means complex interlocking shapes, hinges and snap-fits can be printed as one piece without support marks to clean up. Its tolerance is about ±0.010 in plus ±0.0015 in per extra inch of part size, according to Protolabs.
FDM can work for a rough functional test too, especially for simple shapes, but its minimum wall thickness is thicker, about 0.8 mm versus SLA's 0.2 mm and SLS's 0.3 to 0.6 mm, per Formlabs. That matters if your part has thin snap-fit tabs or living hinges. SLA's tight tolerance (±0.002 in for the first inch plus 0.1%, per Protolabs) can also be useful for a small fit check between two mating parts, even though SLA resin parts are generally more brittle than SLS nylon parts.
What does each process actually cost per part?
Prices vary a lot by part size, shipping and who prints it, so treat any number as a snapshot rather than a quote you can rely on.
At Protolabs, an online manufacturing service, 3D-printed parts start around $95 and machined (CNC) parts start around $65, with CNC turnaround of 1 to 3 business days after you upload a CAD file, according to the company's FAQ. Rapid injection molding there starts around $1,495, which is more relevant once you're past prototyping into small production runs.
For small, simple parts, a marketplace quote can be much cheaper, but shipping and minimum charges often dominate the final price. All3DP pulled 10 real quotes from its own Craftcloud marketplace (disclosed here as All3DP's service) in June 2026, and found a phone stand in FDM PLA quoted at $12.85 before shipping but $23.10 delivered, a gear in FDM ABS at $14.71 before shipping ($22.16 delivered), and a Raspberry Pi Zero case in SLS Nylon 12 at just $8.81 before shipping but $22.81 delivered, see the All3DP cost breakdown. A small miniature came out to $18.44 in FDM PLA versus $72.59 delivered in SLA resin, and a drone part was $30.03 in FDM ASA versus $126.84 delivered in MJF Nylon 12. All3DP's own takeaway is that minimum charges and shipping swamp the per-part cost on small items, and that these are snapshots rather than fixed price lists.
For a wider, non-binding sense of range, Fictiv's prototyping guide suggests simple 3D-printed parts can run under $50, while CNC prototypes often land around $100 to $1,000 or more, see its prototyping cost guide (a guide, not a quote). For a full rundown of where to send your files, read our post on where to get a prototype 3D printed.
What does it cost to print at home instead?
If you expect to iterate on a design many times, buying an entry printer can pay off faster than ordering online repeatedly.
For FDM, filament runs about $20 to $30 per 1kg spool according to JLC3DP. Entry printers are inexpensive at the time of writing: the Bambu Lab A1 mini starts from $199 (typically $219) and the A1 starts from $259 (typically $299), per Bambu Lab's store. A step up, the Prusa MK4S kit runs $709 to $729, or $999 assembled, according to Prusa.
For SLA, Formlabs sells general-purpose resin at $79 per liter (same source as the finish comparison above), and its own Form 4 resin printer starts from $2,625, per Formlabs' printer page, all prices at the time of writing since they change often. There's no consumer-grade SLS printer in this price range, which is part of why SLS parts are usually ordered from a service rather than printed at home.
If you don't own a printer and don't want to order online yet, some public libraries print small objects cheaply. Plano Public Library in Texas charges $0.20 per gram with a $1.00 minimum, requires an STL file, caps submissions at 10 objects, and says printed objects must not infringe anyone's IP, per the library's 3D printing page. Makerspaces are another option. Maker Nexus in Sunnyvale, California offers a $75/month limited membership that includes its 3D printing lab with FDM printers and a Form 3 resin printer, or $160/month for full shop access including a CNC router, with required safety training, according to Maker Nexus.
How do you actually decide?
A short way to think about it:
- Showing off a design to someone else (looks-like model): lean toward SLA for the smooth finish, or FDM if budget matters more than finish.
- Checking that two parts fit together (fit check): SLA's tighter tolerance helps, but a careful FDM print can work for larger, simpler fits.
- Testing a moving or snapping part (functional snap-fit, hinge, gear): lean toward SLS, since it skips support structures and tends to handle thin, interlocking shapes better.
- Testing on a tight budget with many iterations: FDM at home is usually the cheapest way to fail fast and try again.
Before you send a design file anywhere, whether a home printer, a library, a makerspace or an online service, it's worth thinking about what you're sharing and with whom. That's a separate question from which printing process to use, and we cover it in our post on NDAs before sharing an invention. If you don't have a 3D model yet, start with our sketch to 3D model guide or get a print-ready 3D model made before you choose a process at all.


